Email:sales@castingindustrial.com Qingdao Antai Import and Export Co.,Ltd

Qingdao Antai Import and Export Co.,Ltd

Semicentrifugal Casting

Semicentrifugal Casting


                                 

Semicentrifugal casting manufacture is a variation of true centrifugal casting. The main difference is that in semicentrifugal casting the mold is filled completely with molten metal, which is supplied to the casting through a central sprue. Castings manufactured by this process will possess rotational symmetry. Much of the details of the manufacturing process of semicentrifugal casting are the same as those of true centrifugal casting. For a better understanding of this process and centrifugal casting manufacture in general see true centrifugal casting. Parts manufactured in industry using this metal casting process include such things as pulleys, and wheels for tracked vehicles.





The Process

In semi-centrifugal casting manufacture a permanent mold may be employed. However, often industrial manufacturing processes will utilize an expendable sand mold. This enables the casting of parts from high temperature materials.


Figure:96 


Expendable Sand Mold Used To Manufacture A Wheel




The molten material for the metal casting is poured into a pouring basin and is distributed through a central sprue to the areas of the mold. The forces generated by the rotation of the mold ensure the distribution of molten material to all regions of the casting.


Figure:97 


Pouring 
Of A Wheel In Semicentrifugal Casting




As the metal casting solidifies in a rotating mold, the centripetal forces constantly push material out from the central sprue/riser. This material acts to fill vacancies as they form, thus avoiding shrinkage areas.


Figure:98 


Solidification Of A Cast Wheel




The centripetal forces acting on the casting's material during the manufacturing process of semicentrifugal casting, play a large part in determining the properties of the final cast part. This is also very much the case with cast parts manufactured using the true centrifugal casting process. Forces acting in the true centrifugal process are similar to those that influence the material of a metal casting being manufactured by semicentrifugal casting.

When manufacturing by semi-centrifugal casting, the centripetal acceleration generated on the mass of molten metal by a rotating mold is the force that acts to fill the casting with this molten metal. This is also the force that continues to act on the material as the casting solidifies. The main thing to remember about centripetal forces is that the force will push in a direction that is directly away from the center of the axis of rotation.


Figure:99 


Force 
Vector On Spinning Wheel Shows That Centripetal Force Generated Acts Directly 
Away From Center 




Also, the farther away from the center of the axis of rotation, the greater the force.


Figure:100 


Two 
Force Vectors In Different Locations On Spinning Wheel Show That Greater Force Is 
Generated Farther From Center Of Axis Of Rotation 




It can be seen that during the semicentrifugal manufacturing process, the material in the outer regions of the casting, (further from the center of the axis of rotation), is subject to greater forces than the material in the inner regions.


Figure:101 


Forces 
On Material During Semicentrifugal Casting Are Greater In The Outer Regions Of The 
Part




When the metal casting solidifies, the outer region of the cast part forms of dense material. The greater the forces under which the molten metal solidified, the denser the material in that region. So the density of a cast part manufactured by semicentrifugal casting will increase as you travel radially outward from the center.


Figure:102 


Density 
Of Part Varies With Radial Distance 




The high forces in the outer section that push the molten material against the mold wall also ensure a great surface finish of cast parts manufactured by semicentrifugal casting. Another feature of this process, attributed to the usage of centripetal forces, is that impurities within the metal, (such as solid inclusions and trapped air), will form towards the inner regions of the casting. This occurs because the metal itself is denser than the impurities, denser material subject to centripetal forces will tend to move towards the rim, forcing less dense material to the inner regions. This particular detail is also a feature in other types of centrifugal casting manufacture.


Figure:103 


Part 
Being Manufactured By Semicentrifugal Casting Process Shows That Denser Regions 
Form Further From The Center Of Rotation




In industrial manufacture of parts by semicentrifugal casting, it is common to machine out the impurity filled center section, leaving only the purer, denser outer region as the final cast part.


Figure:104 


Center 
Removed From Cast Wheel Only Pure, Very Dense Material Remains


Copyright © Qingdao Antai Import and Export Co.,Ltd. All Rights Reserved.
QR Code
[[Html_Custom]]