Email:sales@castingindustrial.com Qingdao Antai Import and Export Co.,Ltd

Qingdao Antai Import and Export Co.,Ltd

Casting Rapid Prototyping

Casting Rapid Prototyping

You might be wondering what prototyping is? It is nothing but the production of 3D models from CAD images. It has a great impact from the last few years. Prototyping has a great bang on the metal casting. This method needs less time and less cost.

Use of Prototyping in casting industries:

This is used in many metal-casting industries to produce patterns. A second copy of the polymer model can be created using the rubber mold. Let us see the use of rapid prototyping in the parts making process. The most trendy prototyping processes are:

  • Stereolithography

  • Solider

  • Laminated Object Manufacturing, (LOM)

Applications of Prototyping:With the help of Prototyping the development costs of making a product, can be reduced and it can be done within a short span of time.

  • Design verification.

  • Preprototype Tooling

  • Prototype-Production

Design verification:
This type of prototyping is used in early days. It is also cost effective. This type also depends on the application and firm. In high-risk products design verification is used in early days. During that period, 3D model is made to confirm if the design made in the 2-D CAD drawing is correct. Nowadays the Design verification is used in place of this, which is cost effective.

Preprototype Tooling :
It is nothing but a epoxy tooling or silicone robber for cast polyurethane parts. This is cheaper for limited patterns. As many numbers of companies have started using this tool, it resulted in the formation of additional parts that is the silicone rubber tooling.

Production of Prototype :
In the early days, the acrylics were used which had a coefficient of expansion and high shrink rate, which had a marginal result. It also caused shell crack, which had high ash content. The application that is used to build perfect patterns for investment metal castings, Epoxy resin was used in that application. It is widely used as tooling insert for H-13 or A-2 tool steel castings.

Stereolithography :
It is one of the most commonly used methods. It creates the model by hardening the liquid polymer from a container with a laser and it takes a solid CAD model. The beam is directed in the solid areas on the CAD model, which solidifies a layer of 0.002-0.010. Thus it helps to handle complex objects.

Solider :
It produces prototype from solider machine. The base material, which is made of tandem, is spread as a skinny layer of photopolymer of any thickness. This is placed under the mask plate, which is charged through an "image-wise" ionographic process. The layers (0.004-0.006 inch thick) are cured when the ultraviolet light passes through the mask. The wax is filled in all the hollow spaces and then it is then cooled to harden the wax.

LOM
LOM acts like a three-dimensional (3D) laser conspirator. Designing patterns from 2-D models or drawings can be hard and shapes can be misapprehended. Considerable second and cost can be kept by finding the air in 3-D before far procedure can be done. In comparing fast prototyping to conventional pattern making and CNC machining, the store decided fast prototyping was the greatest, about economic course to make an air.

Advantages of Rapid prototyping :
Rapid prototyping is very much advantage over the conventional prototyping because of its low-cost and less timing. The cost savings are significant. Since these tools are available readily, there will be a wide transition in metal casting process.


Copyright © Qingdao Antai Import and Export Co.,Ltd. All Rights Reserved.
QR Code